Grapevine TX Water Heater Installation Requirements | Grapevine Plumber
Category: Water Heater Installation requirements
Need your water heater replaced? Call our Water Heaters for Less Grapevine Plumber at (972) 499-2282 or visit our website for water heater replacement prices at www.waterheatersforless.com.
Grapevine Texas Water Heater Installation Requirements are the same for new and replacement units
·Upper & Lower combustion air required for gas water heaters that are in enclosures. See: 2003 International Residential code for sizing tables for combustion air vents.
·No flexible piping is permitted for temperature and pressure drain.
·Temperature and Pressure drain shall be extended to exterior of the structure.
·Temperature and Pressure drain line shall slope down towards drain discharge.
·The inside diameter of the temperature and pressure relief valve drain line shall not be less than the diameter of the valve.
·Gas vent requires 1” clearance from combustibles (including sheet rock).
·Overflow pans with drain lnes are required on all water heaters installed within buildings, including water heaters within a garage closet.
This is not a comprehensive list of code requirements, but is intended to help with items frequently found in violation of the plumbing code.
****Please not that these requirements are the result of state laws regulating plumbing, not arbitrarily implemented by the City of Grapevine.
All water heater installations shall be permitted and inspected. Work not inspected within 180 days after permit issuance will result in permit expiration.
If you have any additional questions, please call the City of Grapevine Development Services Department at (817) 410-3154
